Valor Fires 940 Owner's Manual download pdf (Page 8)

OFF

Wall Switch

(optional)

Manual On/Off Switch

Thermostatic Remote

Control

Locating Lighting, Operation and Rating

Information Plate

The Lighting, Operation and Rating information is

located on a plate under the ﬁ rebox.

To access the plate, remove any fret or access panel

and grab the plate and slide it out to read it. There is

important information on both sides of the plate.

Servicing Your Fireplace

If your appliance require any attention, contact your

supplier quoting the model number. It will be helpful if

the appliance serial number can also be quoted. This is

on the rating plate located under the ﬁ rebox. The repair

parts are shown in the separate repair parts leaﬂ et.

Please always quote part number and description when

requesting spare parts.

Operating Your Fireplace

There are three ways to control your ﬁ replace.

1. Thermostatic Remote Control;

2. Manual On/Off Switch;

3. Wall Switch (optional) .

The Thermostatic Remote Control can be programmed

to function automatically—see pages 9–13.

The manual On/Off switch must be ON for the ﬁ replace

to function. It can be used to shut off the ﬁ replace in

case of emergency—see above.

The Wall Switch (optional) can be used to turn on, off

and to increase or decrease the ﬂ ame height—see

1265WSK—Wall Switch Kit.

NOTE: The remote control in the AUTO mode will

override the wall switch.

Wall Switch

(optional)

Remote control

handset

Valve Switch

OFF

— O

How to Turn Your Fireplace OFF (including pilot)

Familiarize yourself with each of these methods before

operating your ﬁ replace.

Handset and Wall Switch: Press and hold the OFF

button for a second (either on the handset or the wall

switch).

If the ﬂ ames are on, they go down and you hear the

valve motor wind down. You hear a clunk and a beep

indicating that the valve has received the signal from

the remote control.

Manual ON/OFF Switch: Press the O button.

How to Ensure Your Fireplace Cannot

Be Turned ON Inadvertently

You can use one of the two following methods to

ensure that your ﬁ replace will not turn on when you

don’t want it on.

First, ensure your ﬁ replace is turned off—including

the pilot—and cold BEFORE going ahead.

• You can prevent your ﬁ replace from lighting by

pressing the O button on the manual ON/OFF

switch on the gas valve—see image above.

• Alternately, you can remove all batteries from the

receiver as well as the battery from the handset.

Automatic Shut-Off (in certain conditions)

Your ﬁ replace’s remote control is equipped with an

automatic shut-off mechanism which is activated in

certain conditions. See page 13 in the Remote Control

Operation section for a description of this feature.

Owner’s Information

WARNING

DO NOT ATTEMPT TO TOUCH THE DATA PLATE

WHILE THE FIREPLACE IS STILL HOT! Let the

ﬁ replace cool ﬁ rst before touching it.

OWNER’S

INFORMATION

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 47 48

Comments to this Manuals

No comments

Valor Fires 940 Owner's Manual Page 8

Comments to this Manuals

Related products and manuals for Fireplaces Valor Fires 940